Welcome to the SRP Forum! Please refer to the SRP Forum FAQ post if you have any questions regarding how the forum works.
KDIV
About
- Username
- KDIV
- Joined
- Visits
- 210
- Last Active
- Roles
- Member
Comments
-
will give it a try later tonight, thanks,
-
apologies for delayed response, deliverables come first, I did as Kevin requested above, and yes, as all company workstations, I have malware/anti-virus while in VPN. Attached is a copy of the error message, I am receiving after confirming director…
-
did all that and its on a single workstation.
-
I actually think SRP editor has to be installed, as I do not think it was setup correctly when VM workstation was created. Not sure, but am going to send this issue to HelpDesk, as I have tried many things and none have worked, I cannot check the "I…
-
you mean like the attached? in an elevated DOS session, I went to the folder which contains the *.ocx files, ran the regsvr32 on all three *.ocx files separately, I received the dialogbox that registered was successful, bounce workstation and ran OI…
-
ok, as suspected, that wasn't the issue. I have attached what my SRP Editor looks like -- its not working and I suspect it needs to be installed, the same for the TABLE_SEARCH function. Can you look at the attach and tell what needs to happen in or…
-
Got it, thank you.
-
Kevin - in original request, I requested SRPUtil.ocx, would you provide that one as well? Mahalo!
-
Another question, I was told SRP editor was already installed on my workstation, but it doesn't run, so noticed no *.ocx, was instructed to obtain the *.ocx and *.dll and just drop them in my \\revsoft\client\... folder and register the controls and…
-
thanks Kevin, are these the ones that are used @NCB? As apparently there is some versioning issues, so I was told to obtain the "version" post Feb5th event. TIA.
-
Thanks Corby, checked the logs and its does indicate an interrupt/ABEND - but no more information than I already knew, so I just bounced everything RDP/VM , let it sit for a bit, cleared registry, cache, even emptied recycle bin, after all that, boo…
-
I have bounced the VM workstation and RDP workstations, but I suspect when the workstation crashed, something might have taken a hit in SRP as it was trying to boot when it crashed. I was wondering if I re-install SRP editor, it that might solve, a…
-
ok, found it, dangling COMMA$, as Roseanne Roseannadanna would say, it's always something!
-
Hey Don - I got it figured out and I believe it was some type of blockage based on network configs over here, but I believe I have it working, as I did not receive a FATAL error, but a more constructive error i.e. "Unable to send to a recipient", ye…
-
yes, dll (SRPMail.dll) is in my OI root on the p:\ drive; p:\Repositories\Stacy.Mecklenburg\OIDev or \\program\programming\Repositories\Stacy.Mecklenburg\OIDev, file version 3.0.1.2, attached is a copy of the properties dialogbox. apologies would h…
-
yes, dll (SRPMail.dll) is in my OI root on the p:\ drive; p:\Repositories\Stacy.Mecklenburg\OIDev or \\program\programming\Repositories\Stacy.Mecklenburg\OIDev, file version 3.0.1.2, attached is a copy of the properties dialogbox. apologies would h…
-
its the return value from "MessageSent = SRPSendMail(Message,Config)"; I installed the SRP_MAIL, but looking at the help/about, does not seem to list SRP Mail. Maybe I should try to install it again. I have attached the help/about dialogbox, it se…
-
Adding UNC to list of "trusted sites..." does not work for our environment, so if a user needs to install any SRP utilities, do we have to get an RDK version install of the downloaded installers from the SRP website? As I need to install several of…
-
Understood Kevin, I appreciate the information and just trying to determine a work-around. Since the installation only did a partial install as an *.exe, I ran the RDK that you provide. btw - does it really matter if RDK to application or does it ha…
-
Yes, I will need to confirm, but so far, based on the mobile carriers I will be using, does allow, but at some point it will stop and will need to develop our own API or use a 3rd party. Thanks again.
-
Don - as a work-around, until we can procure a gateway appliance and/or API development, can I send a text via SRP mail the "old-fashion", by providing a mobile# and mobile carrier domain? i.e. To: 4154547188@tmomail.net and sending to SRP_Send_Mail…
-
"GSM gateway appliance" - yes, its all starting to point in that direction, but currently, the "appliance" is "in-discussion". I have researched other options but it's like re-inventing the wheel and not really interested in that aspect. Thanks fo…
-
Thanks Kevin, appreciate the information, albeit a bit disappointing. I am trying to determine a company standard for sending emails and texts, we send a lot of email campaigns and texts. Currently, everyone is using a different mail utility in OI…
-
Kevin - I ran the SRP Mail utility via the installer (*.exe) and attached is the path/location I installed to and that the "finish" dialogbox for completion of the installation. Then I compared what was installed onto my workstation to SRP's online…
-
if .NET is okay, moot point from that aspect. Now its a matter of getting the rest of the SRP mail stuff that did not install. Per Don, he seems to think there is a situation whereas the installer is blocked, thus making the install partial. Guess …
-
looks like I do have v4.8 via MS updates... I ran the SRP mail utility install via the *.exe, should we only be installing SRP products via RDK? TIA. <32Bit> 2.0.50727.9164 ->C:\Windows\Microsoft.NET\Framework\v2.0.50727 4.8.4515.0 -…
-
Kevin - I saw your message above regarding "Make sure .NET Framework 4.8 is installed" - is that a requirement to use SRP Mail utility? I have recently installed SRP Mail utility to use in an silent error routine. I have encountered a few anomalies…
-
Current employer.
-
Jim - although a very late reply, just an FYI. SOC 2 Type 2 report(s) is a very specialized type of audit. Typically companies who store client's data, are required to be SOC II compliant. Its not just where the data sits on server, it has to do…
-
Kevin - thanks for the info, I am still missing one image that I trying to find, I have to get off my grid, fire and grid is shutting down but I have attached the area where I am missing one more image. TIA.